[NewCandle] Constrained hydrolysis

[Keith Nagel]

I have made this in the past by mixing graphite with porcelain and firing
sufficient to drive out the carbon. The result was like
a soft pumice, the ratio of carbon to clay determining
the porosity.

K.

-----Original Message-----
From: newcandle-bounces at ipdiscover.com
[mailto:newcandle-bounces at ipdiscover.com]On Behalf Of John Steck
Sent: Wednesday, March 07, 2007 2:00 AM
To: New energy for the new world.
Subject: Re: [NewCandle] Constrained hydrolysis


loose ceramic lattice?  would make a nice hot plate....

-john

-----Original Message-----
From: newcandle-bounces at ipdiscover.com
[mailto:newcandle-bounces at ipdiscover.com]On Behalf Of Jones Beene
Sent: Monday, March 05, 2007 4:24 PM
To: New energy for the new world.
Subject: Re: [NewCandle] Constrained hydrolysis


Hey guys,

We should consider, or try to design, a low-tech flame arrestor so that 
gas coming off of any low output cell can be burned on the spot. That 
way it might be possible to get a "ballpark" thermodynamic balance.

I assume that a coleman wick is way too porous for H2 and maybe not 
catalytic. They use a water bubbler arrangement for some JC experiments, 
which is probably the way to go if you add some nickel mesh to 
catalytically ignite, as at low volume -- you could lose a flame from 
time to time. Any other suggestions?

_______________________________________________
NewCandle mailing list
NewCandle at ipdiscover.com
http://ipdiscover.com/mailman/listinfo/newcandle_ipdiscover.com

_______________________________________________
NewCandle mailing list
NewCandle at ipdiscover.com
http://ipdiscover.com/mailman/listinfo/newcandle_ipdiscover.com