[NewCandle] Cold Electricty

Jones Beene jonesb9 at pacbell.net
Sat Oct 20 13:05:15 EDT 2007


oops

> I assume that the cores, once they start ringing,
> continue to do so for a short time. 12.3 MHz seems
> to give the most effect but there seems to be ZERO
> current across the LEDs.

Sorry I am confusing an earlier version with the later
one where the resonance is up around 18.7 MHZ  and
there is a peak current to ground from the circuit of
~450mA maximum (to minimum of 0f ~105mA). This is
extraordinary current for a free-floating circuit.

The signal displayed appears to be modulated by
~2.64MHz. Assuming an error induced by the scope
accuracy it appears the primary signal is ~7 times the
modulation, where 18.7/2.64 = 7.083.

What adds to the confusion is the chart derived from
work with the earlier circuits. P

More later,

Jones



More information about the NewCandle mailing list